Directions for use: This should not be stirred during use. Remove wax, grease, etc. apply by brush, roller, spray or applicator, at room temperature not in direct sunlight. This can be used for tinting universal colors. New Work: Sand with grain or sand or steel wool lightly between coats. Fill open grained wood with paste wood filler following direction on label. Apply a thin first coat of Gym Finish. Apply second coat of gym finish allowing a minimum of 10 hours between coats. Two coats are recommended. Old Work: Remove old finish in poor condition; completely refinish same as new wok. Sand varnished surfaces to smooth condition. Touch up worn areas follow with one or two coats. This product is designed to be used directly from the can without thinning under normal environmental and application conditions.

Approximately 500 square foot per gallon depending on surface. It forms a tough protective surface and is highly resistant to weather, waste, abrasion, foot traffic, alcohol, stains, etc.

This contains petroleum solvents. Keep away from heat and open flame. To avoid breathing vapors or spray mist, open window and doors to use other means to ensure entry of fresh air during application and drying. Always wear respiratory protection. If you experience eye watering, headaches, dizziness or nausea, increase fresh air or wear respiratory protection (NIOSH/MSHA TC23C or equivalent) or leave the area. Close container after each use. Avoid prolonged contact with skin. Do not take internally. Use only with adequate ventilation KEEP OUT OF THE REACH OF CHILDREN