Surfaces to be painted must be clean and free of grease, wax, scaling paint and mildew: glossy areas should be dulled with sandpaper. Wash off water-soluble materials. New plaster and masonry must be cured before painting. Priming coats, if to be used under medium or deep colors, should be tinted to approximate shade of finish coat. Previously Painted Surfaces, Wallboard, and Unpainted Cured Plaster or Masonry: Should be finished with one or two coats of LATEX EGGSHELL ENAMEL.

Stir paint before use. Apply with short-nap roller, nylon brush or spray gun in full, even coats, feathering off with tip of brush or light pressure of roller. If touching-up is required, wait until finish is thoroughly dry, to ease brushing in hot weather or when applying over extremely porous surfaces, LATEX EGGSHELL ENAMEL can be thinned with a small amount of water. Do not add oils, varnishes or paint thinners.

Brushes, rollers and other painting tools should be washed in warm, soapy water promptly after painting.

KEEP OUT OF REACH OF CHILDREN. USE ONLY WITH ADEQUATE VENTILATION. DO NOT TAKE INTERNALLY. CLOSE CONTAINER AFTER EACH USE. AVOID PROLONGED CONTACT WITH SKIN OR BREATHING OF SPRAY MIST. DO NOT APPLY AT TEMPERATURES BELOW 50 DEGREES FARENHEIT PROTECT FROM FREEZING.